UVC Meters and Detectors

A complete International Light system for measuring UVC output of both broadband and narrow band germicidal/disinfecting light sources such as mercury lamps, and LEDs. Instantly verify that the UVC level are sufficient to disinfect the surface, air or water being treated or use the integrate feature to track the fluence. The ILT2400-UVC peaks at 265 nm, UV-C spectrum where most pathogens, including the COVID-19 virus, are deactivated. System includes the meter, detector, rugged carrying case, and an ISO/IEC 17025:2017 accredited, NIST traceable calibration certificate.

This germicidal/disinfection light measurement system from International Light has everything you need to start validating the light output from your anti-microbial/germicidal/UVC disinfection system today. The system is configured to measure narrow-band UVC light in the 254 nm wavelength range, from common germicidal UV sources such as low-pressure mercury lamps. The system includes meter, detector, ISO/IEC 17025:2017 accredited, NIST traceable calibration and certificate, and rugged carrying case.

International Light’s complete system for measuring UVC germicidal/disinfecting light sources such as low and medium pressure mercury lamps, and LEDs. Instantly verify that your UVC disinfecting system is getting the job done. The ILT2400-UVGI is specifically configured and calibrated to cover the area of the UV-C spectrum where most pathogens, including the COVID-19 virus, are deactivated. System includes the meter, detector, rugged carrying case, and an ISO/IEC 17025:2017 accredited, NIST traceable calibration certificate.

International Light’s Flash Measurement System is a complete UVC measurement system for validating germicidal/anti-microbial disinfectant systems using xenon lamps, pulsed LEDs and other pulsing UV light sources. The system comes with a meter, durable SiC sensor with scanned SAR-5 Calibration, ISO/IEC 17025:2017 accredited, NIST traceable calibration certificate, and rugged carrying case.

International Light’s germicidal/disinfection light measurement system has everything you need to start validating the 254 nm light output from your anti-microbial/germicidal/UVC disinfection system. This narrow-band UV meter is designed for low pressure mercury lamps and other narrow-band 254 nm sources. Easily toggle between dose and irradiance readings with a single button. The graphical interface not only displays the uniformity of the light over time, but also calculates the min, max and average. The device’s low-profile input optic sits at the end of a 3′ cable, reducing user UV exposure.

The ILT770-UV UVC light intensity meter and measurement system from International Light has everything you need to start validating the light output of your UVC LED’s and other narrow-band UVC light sources. Easily toggle between dose and irradiance readings with a single button. The graphical interface not only displays the uniformity of the light over time, but also calculates the min, max and average. The device’s low-profile input optic sits at the end of a 3′ cable, reducing user UV exposure

International Light’s new portable, compact UV spectrometer with increased broadband sensitivity. The ILT960 can measure UV light levels as small as .4 uW/cm2/nm. The ILT960UV-RAA4 has everything you need to start taking measurements. The system includes the spectrometer, meter fibre optic light guide, RAA4 right angle cosine correcting input optic, calibration with certificate, and carrying case. Compatible with SpectriLight III software package.